Basic Info.
Model NO.
SR-G
Accuracy Grade
±1°c or 1% of Full Scale
IP Rating
AAA
Certification
CE
Customized
Customized
Communication Mode
Usart Serial Output, Independent Communication Add
Fiber Optic Size
3mm in Diameter
Fiber Length
Stardard Length 3m(Customizable)
Power Supply
DC5V
Temperature Range
-40ºC~+200ºC
Standard Deviation
±1°c or 1% of Full Scale
Resolution
0.1ºC
Calibration Method
This Sensor Does Not Need to Be Calibrated.
Test Standard
Under The Condition of 0.4m to - Ground Distance
Specification
Size: 44mm*22mm*22mm (length * width * height)
Trademark
Skyray
Origin
China (Mainland)
Production Capacity
1000
Product Description
Product Characteristics:
1. Measuring the temperature of the object in real time
2. Strong Immunity to electromagnetic field interference
3. Withstand high voltage,Flame retardant and explosion proof
4. Single point temperature measurement, digital signal output
5. Suitable for small space temperature measurement
(the minimum diameter of the probe can be customized to 600um)
1. Measuring the temperature of the object in real time
2. Strong Immunity to electromagnetic field interference
3. Withstand high voltage,Flame retardant and explosion proof
4. Single point temperature measurement, digital signal output
5. Suitable for small space temperature measurement
(the minimum diameter of the probe can be customized to 600um)
Independent research and development of fluorescent optical fiber temperature measurement system manufacturers. The preparation process of the fluorescent optical fiber temperature sensor has good consistency and wide application field. The application cost of the fluorescent optical fiber temperature sensor in the industrial field is higher than that of other temperature measurement methods.
Technical indicators:
| Power supply: | DC5V |
| Temperature range: | -40ºC~+200ºC |
| Standard deviation: | ±1°C or 1% of full scale |
| Resolution: | 0.1ºC |
| Communication mode: | USART serial output, independent communication address is required. The sampling rate is 9600 and the temperature update period is 300ms. |
| Calibration method: | This sensor does not need to be calibrated.The system uses adaptive measurement and does not require LD value calibration. |
| Size: | 44mm*22mm*22mm (length * width * height) |
Pin structure description:
USART Serial output
- +5VDC(Power Supply)
- GND
- RXD(Data reception)
- TXD(Data transmission)
SR-G fluorescent fiber optic temperature sensor dimensions:
1. Fiber ST plug
2. Electrical connector
3. Screw holes (Ф2 x 6mm) for fixing two M2 screws