Basic Info.
Model NO.
ZLT-CJ8A
Structure
Desktop
Material
Stainless Steel , Nylon
Certification
ISO17025 Calibration Provided
Application
School, Lab
Type
Measurement Type
Usage
for Battery
MOQ
1 PC
Delivery
in 30-35 Days
Standard
IEC60335-1 Annex B20.1
Transport Package
in Wood Box
Specification
20ml, 30ml, 50ml, 100ml
Trademark
ZLTJC
Origin
Guangzhou, China
HS Code
9031809090
Production Capacity
Stock Available
Packaging & Delivery
Package Size
130.00cm * 75.00cm * 135.00cm
Package Gross Weight
60.000kg
Product Description
IEC60335-1 Annex B20.1 Chemical Battery Case Pressure Testing Device
To measure the enclosure of a battery-operated appliance incorporating an integral battery that uses metal-ion chemistry shall withstand the pressure generated when a cell vents during failure.Conform to IEC60335-1:2020 annex B.20.1.
Test requirement:a volume of air of the amount specified in Table B.3 of IEC60335-1 shall be injected through a (2,85±0,05)mm diameter orifice into the enclosure at an initial overpressure of 2070kPa±10%.Test fittings used for the test shall not increase the enclosure volume by more than 3 ml.The overpressure within the enclosure shall drop below 70kPa within 30 s without any unintended rupturing damage to the enclosure.
IEC60335-1 Table B.3-Volume of air injected at 2070kPa
| Capacity of the single metal-ion cell with the highest capacity Ah | Volume of air(±10%) ml |
| 0,2≤Ah 5 | 20 |
| 5≤Ah 25 | 30 |
| 25≤Ah100 | 50 |
| Ah≥100 | 100 |
Technical specification:
| Power supply: | AC220V50Hz,other voltages on request. |
| Control mode: | By PLC |
| Pressure mode: | Manual mode |
| Pressure range: | 0~4MPa |
| Volume of air injected at 2070kPa: | 20ml,30ml,50ml,100ml. |
| Diameter of steel orifice: | 2,85±0,05mm. |
| Pressurized medium: | Air. |
| Test time: | 30 S or 0-99999 s can be set. |
| Test equipment weight: | Approximately 60 kgs. |
